- High alkaline cleaners
- Wax strippers
- Oven cleaners
- Toilet bowl cleaners
- Metal cleaners
- Floor cleaners
- Steam cleaners
- Car wash formulations
- Textile wetting agent
-
DePHOS QSA-90 is ahigh foaming, complex phosphate ester in free acid form. APPLICATIONS:
-
DePHOS 4AL is a low – moderate foaming phosphate ester in free acid form. Suggested for use as a lubricant, corrosion inhibitor, and emulsifier in metal working applications. Very effective for aluminum machining applications. APPLICATIONS: • Metal working products • Rolling oils • Emulsion Cleaner • Alkaline cleaners
-
DeTHOX TDA-8.5-15W is anonionic, 85% active, tridecyl alcohol ethoxylated with approximately 8 -9 moles of EO. It contains ~15% water to maintain fluidity for easy handling. APPLICATIONS • High foam alkaline and acid detergents • Solubilizer for alkyl aryl sulfonates • Wetting agent in highly acidic systems • Emulsion paint strippers • Solubilizer for fragrances and oils • Textile detergents•Agricultural spray emulsions • Floor cleaners • High pressure spray cleaners • Emulsion polymerization • Wetting agent for corrosion inhibitors • Pulp & paper processing • Dust suppressant for mining operations • Vehicle wash detergents
-
DeTHOX AMINE C-15 is an ethoxylated coconut amine with fifteen moles of ethylene oxide.It exhibits mildly cationic behavior and is used primarily used as an emulsifier, lubricant, corrosion inhibitor,and dispersant. APPLICATIONS • Water based inks • Wetting and leveling agent for use in dyeing applications • Emulsifier for agricultural chemicals • Lubricant in synthetic cutting fluids • Corrosion inhibitor in down-hole drilling applications • Latex emulsifier and stabilize
-
DeTERGE AN508-LFis a complex modified amphoteric surfactant. APPLICATIONS • Low foam, alkaline detergents • Caustic cleaners • Acid cleaners • Mechanical dishwashing detergents • High pressure alkaline detergents • Steam cleaners•Metal cleaners • Food plant and dairy cleaners • Plating baths•Concrete cleaners • Alkaline soak and tank cleaners • Alkaline paint stripper • Mechanical hard surface cleaner formulations • Aircraft and aluminum cleaners
-
DeTAINE PB is a readily biodegradable, palmitic derived betaine acceptable for use in a wide variety of formulations including Personal Care applications (INCI name: Cetyl Betaine). This amphoteric, alcohol-free betaine produces rich, dense foam and affords good viscosity building properties. Suggested for use in acidic and alkaline formulations. APPLICATIONS • Alkaline or acid foaming cleaners • Bowl cleaners • Vertical surface cleaners • Fine laundry and fabric detergents • Manual hand dishwashing detergents • Viscosity & foam builder for liquid detergents • Car wash detergents • Hand cleansers, shampoo, body wash • Sulfate-free personal care products
-
DeSULF SO-LF33 is a moderate foaming anionic, 33% active,sodium octylsulfate. APPLICATIONS • Caustic cleaners • Alkaline or mild acid cleaners • Cleaners containing chlorine or peroxide • All purpose cleaners • Rinse aid for mechanical dishwashing • Glass cleaners•Fire fighting agents • Mercerizing agents for textiles • Wetting agent for synthetic coolants • High pressure spray detergents • Metal cleaners • Carpet extraction cleaners
-
DeIONIC LF-60 is a low foaming, nonionic alkoxylated alcohol with excellent wetting and dispersing properties. APPLICATIONS • High spray pressure cleaners • Mechanical dishwashing • Industrial alkaline cleaners • Industrial metal cleaners • Liquid laundry detergents • Pigment grinding and dispersant • Bottle washing • Textile wetting and scouring • Agricultural sprays •Powdered detergents
-
DeCORE BE is a water-soluble,anionic, non-foaming amine borate. It is a very effective corrosion inhibitor for ferrous and non-ferrous metals in neutral to mildly alkaline systems including aerosol formulations. APPLICATIONS: • Synthetic coolants &cutting fluids for ferrous and non-ferrous metals • Cooling tower additive • Corrosion inhibitor for down-hole drilling • Corrosion inhibitor for radiator • Corrosion inhibitor for aerosol cans • Corrosion inhibitor for aqueous paints & coatings • Metal working fluids
-
Alumina powder that is dispersible in water or ethylene glycol. For use in high temperature coating and as a binder
-
specific gravity: 1.01-1.04 visc: 250 appearance: white opaque liquid solids: 21-23 %
-
Care Care Drying Aid Accoquat CS ULTRA NF is a unique nonflammable proprietary blend of cationic and nonionic emulsifiers and is especially designed for micro-emulsification of mineral seal oils (MSO) or other organic hydrophobes. Features & Benefits: Works effectively for microemulsification of a variety of hydrophobes including mineral seal oil, waxes, and silicones
-
Active ingedients: > 96% Refractive index: 1.44-1.46 Flash point: > 100 C Usage level: .2-.8 % total formulation
-
Thickner for alcohol solutions.
- Stiff Gel after neutralization
- Easy to mix and disperse
- Pumpable and pourable without runoff
- Stable with other inert additives such as fragrances
- Can make gels comparable to commercial products
-
Fumed silica rheology additive, treated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
2,4,5,6 tetrachloroisopthalonitrile (40% CTL) Industrial fungicde (AKA Chlorothalonil) Typical areas of use are paints and coatings, adhesives, caulks and mulch colorants. Long term mold preventative. effective over pH range of 1-10.
-
1,2-Benzisothiazolin-3-one (BIT) available as zero VOC waterbased dispersion
-
1,2-benzisothiazolin-3-one (BIT), glycol based solution of BIT. Effective biocide for paints, polyer lattices, adhesives, joint compound and dispersed pigments. Does not contain or generate formaldehyde and is MIT free
-
PANSIL 400 is a polyfunctional additive, supplied as a fine powder manufactured from sepiolite. It is an excellent suspension aid and active filler with an outstanding efficiency/cost ratio.
Properties
PANSIL 400, due to its high surface activity produces an increase in system component distribution favouring the increase of immature resistance and keeping stability after high temperature curing. PANSIL 400 improves polymer, filler, organic and inorganic fibre distribution.Fields of application
- Asphalt sheets.
- Conglomerating in molecular sieves.
- Seed coating.
- Asphalt emulsions.
-
Pansil 100 is a polyfunctional additive manufactured from sepiolite. Its thick powder granulometry makes it easy to handle and use. It is an excellent suspension aid and active filler with an outstimding efficiency/cost ratio.
-
TYTAN Titanate Coupling & Dispersing Agents are molecular bridges at the interface between inorganic fillers (such as CaCO3, BaSO4, graphite, talc, carbon black, silica and metal oxides) and polymers (such as PP, PE, PVC, PBT, PET, ABS and rubbers). When incorporated into polymers, the coupling agent could improve filler loading, pigment dispersion, processability and composite mechanical properties to achieve the specification desired. As a comparison, silane coupling agents only reacts with hydroxyl groups on the filler surface via water condensation of silanol-siloxane process, therefore it is suitable for glass, alumina hydroxide, magnesium hydroxide etc. The advantage of titanate coupling agents is that they not only react with hydroxyls, but also the free protons on the inorganic interface, which results in the formation of organic monomolecular layers on the inorganic surface forming the bonding for polymers. Dosage is up to the property required and the filler type used is dependent on its surface area, the larger the surface area, the more Tytan titanate coupling & dispersing agent are needed. As a guide, the general dosage range is 0.2% ~ 2.0% by weight of filler.
-
Tytan CX200 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX200 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX200 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Tytan CX200 has improved compatibility with a broad range of paint formulations but it is still recommended that use of Tytan CX200 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
Tytan CX400 is titanium chelate of alkanolamine titanate complex and developed as a rheology modifier for use in emulsion paints. Tytan CX400 reacts with colloid stabilized binders to impart thixotropic structure. Tytan CX400 is suitable for VOC free paint.