-
Tytan AP310 is an ethyl citrate titanium complex that can be used as an adhesion promoter for printing, crosslinker for paints and as a catalyst for esterification. Due to its chelated structure, Tytan AP310 shows delayed reaction at ambient temperature and thus facilitates storage stability of inks.
-
Tytan S3 is an ethylacetoacetate titanate silane chelate used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. Tytan S3 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.
-
TYTANTM Titanate Coupling & Dispersing Agent Titanate Coupling Agents are molecular bridges at the interface between inorganic filler such as CaCO3, BaSO4, graphite, carbon black, silica and metal oxide with polymer such as PP, PE, PVC, PBT, PET, ABS and rubbers. When incorporated into polymer systems, the coupling agent could improve filler loading, pigment dispersion, impact strength hence reduce embrittlement. Silane coupling agent only reacts with hydroxyl group on the filler surface via water condensation of silanol-siloxane process, therefore, it is suitable for glass, alumina hydroxide, magnesium hydroxide and metal powder etc. The advantage of titanate coupling agents is that they react not only with the hydroxyls but the free protons on the inorganic interface, which results in the formation of organic monomolecular layers on the inorganic surface forming the bonding for polymers.
-
Pangel B-42 is a powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 provides a strongly pseudoplastic character, producing high consistency levels without affecting viscosity during application. It exhibits its high effectiveness as anti-settling additive in formulations with high solid contents. Use of Pangel B-42 has the following advantages against other conventional additives: • Coatings and paints- Prevents settling of pigments and fillers; controls sagging without aggravating leveling; high stability during transportation and storage. • Printing inks: Improves consistency and prevents settling of pigments. • Paint strippers: Improves stability and facilitates stripping action. • Sealants and joints: Improves wetting and suspension properties; controls sliding. • Others: Control of sagging and dripping; improves stability.
-
Rheological Additive HIGH PURITY SODIUM BENTONITE-BASED PANGEL M90F is a high purity smectite-based additive with a selected particle size, specially developed to modify the rheology of joint compounds, plasters and fillers formulated in both powder and paste. PANGEL M90F is recommended where a fine particle size is required. PANGEL M90F can be used also as a binder agent of organic and inorganic powders. Its elevated swelling capacity in contact with water permits it to break apart easily while maintaining elevated resistance when dry.
-
Rheology modifier for mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Properties CIMSIL A55 is a chloride-free thixotropic additive specifi cally developed to act as an anti-sagging/anti-slipping agent, CIMSIL A55 fully develops its rheological properties by activation in the presence of cement or gypsum. It improves workability and visual fi nish in the systems to which it is incorporated. CIMSIL A55 gives mortar, plaster and concrete the following properties: • Thixotropy • Workability • Improves adherence to the substrate • Improves pumpability • A voids both tile slipping and mortar sagging • Decreases bleed and segregation • Gives homogeneity and cohesiveness to the finish product • Improves the surface finish Fields of applications • Pumpable concrete • Decorative concrete • Precasted concrete • Rendering mortar • Tile adhesive mortar • Waterproof mortar • Fill-in mortar • Self-levelling mortar • Repair mortar • Gypsum-based spray plaster • Gypsum-based thin layer plaster • Gypsum-based adhesive plaster Dosage Dosage of CIMSIL A55 varies according to the type of application. However, dosages between 0.25 and 1%, referred to the weight of the cement are recommended.
-
Powdered additive that modifies the rheology of mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Cimsil A35 is a thixotropic additive specially developed to act as an anti-sagging / anti-slipping agent, improving workability and visual finish in the systems to which it is incorporated. Cimsil A35 gives mortar, plaster and concrete the following properties:
- Workability
- Thixotropy
- Decreases bleed and segregation
- Gives homogeneity and cohesiveness to the finished product
- Improves adherence to the substrate
- Improves pumpability
- Avoids both tile slipping and mortar sagging
- Improves the surface finish
- Pumpable concrete
- Decorative concrete
- Precasted concrete
- Rendering mortar
- Tile adhesive mortar
- Waterproof mortar
- Fill-in mortar
- Self-levelling mortar
- Repair mortar
- Gypsum-based spray plaster
- Gypsum-based thin layer plaster
- Gypsum-based adhesive plaster
-
CIMSIL G30 is an attapulgite based additive specifically developed to modify rheology of wet and dry joint compounds and adhesives. CIMSIL G30 is a rheological additive fully inert and compatible with most common binders either organic or inorganic being particularly effective in highly viscous filling pastes as joint compound for drywall or plasterboards. CIMSIL G30 improves the following properties: • Sag resistance. • Workability. • Improves spreading and pumpability. • Decreases bleed and segregation during storage. • Gives homogeneity to the finish product. • Improves consistency and viscosity under high electrolyte concentration. CIMSIL G30 is a shear thinning additive what allows the right application on the wall while strongly improves sag resistance of the compound before drying or setting. It is normally combined with cellulose ethers showing a good compatibility with them and also with other organic thickeners.It can be also used in cement mortars and other cement based systems in order to provide shear thinning properties. Fields of application • Wet and dry Joint fillers. •S packle compounds. • Crack fillers & mastics. • Sealants.
-
PANGEL RMA series is managing rheology on demand, improving cohesion, reducing bleeding and segregation and enhancing concrete pumping operations. PANGEL RMA 400 series are high performance liquid concrete admixtures based on silicates modified and specifically developed for shotcrete. PANGEL RMA 400 series increase sprayed concrete cohesion providing superior bond to rock substrate, faster early strength development and enhancing sprayability and pumpability properties, minimizing the rebound and allowing larger thickness build-up in a single pass in tunnels and mining applications. PANGEL® RMA 400 series is specially developed for underground: • Temporary and permanent rock support in mining and tunneling • Slope stabilization • Grouting FEATURES & BENEFITS • Reduces/ replaces silica fume/ microsilica • Enhances sprayability properties • Reduces rebound reducing materials waste • Increases thickness build-up in single pass • Increases very early strength • Safer, healthier reducing dust generation • Increases mix design robustness allowing moisture and grading tolerances PANGEL RMA 400 series increase concrete cohesion developing faster early strength without affecting other concrete plastic properties (slump life, air control management) and enhancing pumpability.
-
PANGEL CS 610 is a pozzolanic additive based on colloidal silica with very fine (7 nanometers) and narrow particle size distribution. Its rapid surface penetration leads to very fast bonding with calcium hydroxide [Ca(OH)2] which provides an outstanding densifier/hardener effect. PROPERTIES • PANGEL CS 610 reacts with calcium hydroxide in the concrete matrix to create additional calcium silicate hydrates (C-S-H). • PANGEL CS 610 provides a harder and more uniform surface making it withstand abrasion and take a better polish effect. • Due to its unique structure, PANGEL CS 610 works as densifier/ hardener in concrete flooring applications providing better overall mechanical performance (surface hardness, compressive strength, permeability and abrasion resistance ) thus replacing other silicate densifiers. PANGEL CS610 provides tangible benefits and savings vs. other silicate based (i.e. sodium, potassium, lithium) densifiers: • Reduces operating costs by increased ease of maintenance and cleaning • Speed of application; no overnight curing • Deeper penetration • Faster reacting • Safe to handle liquid – lower pH than silicates • Reduces dusting, efflorescence and ASR • Compatible with colored concrete, stains and dyes • No whitening potential; no caustic gel to scrub off • Non-hazardous. Water-based, low odor
-
Cardolite NT-1300 is an tertiary amine catalyst. Offset to Ancamine k54.
-
Cardolite NX-202x products are low viscosity multipurpose resin modifiers. The long hydrophobic aliphatic side chain of the cardanol molecule gives these products a very low viscosity and provides excellent early water resistance and corrosion protection. By using NX-202x products as epoxy diluents and accelerators, high solids or solvent free formulations can be achieved with enhanced workability and faster cure without sacrificing other performance properties. In addition, the flexibility of the side chain helps increase impact resistance of the final coating. Different Grades Available. NX-2023 can replace nonyl phenol. NX 2023 is non toxic,exhibits higher visc reduction, does not reduce gel time like NP, and shows improved water resistance. These products are a good alternative to synthetic phenolic diluents that have unfavorable labeling.
