- Stiff Gel after neutralization
- Easy to mix and disperse
- Pumpable and pourable without runoff
- Stable with other inert additives such as fragrances
- Can make gels comparable to commercial products
-
Thickner for alcohol solutions.
-
Tytan CX400 is titanium chelate of alkanolamine titanate complex and developed as a rheology modifier for use in emulsion paints. Tytan CX400 reacts with colloid stabilized binders to impart thixotropic structure. Tytan CX400 is suitable for VOC free paint.
-
Tytan CX200 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX200 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX200 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Tytan CX200 has improved compatibility with a broad range of paint formulations but it is still recommended that use of Tytan CX200 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
Tytan CX100 is a chelated Titanium Alkanolamine Complex developed as a rheology modifier for emulsion paints. Tytan CX100 reacts with colloid stabilized binders to impart a thixotropic structure to the paint through shear sensitive hydrogen bonding. Tytan CX100 has no to little effect on the rheology of emulsion paints based on surfactant stabilized binders. Use of Tytan CX100 shall always be based on sample testing to evaluate potential interaction with other components or additives of the paint formulation.
-
An inverse emulsion thickener which imparts a short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a pH range of 1-14. Supplied as an easy to use, low viscosity liquid which gives an instantaneous thickening effect on direct mixing into the composition. The polymer is already in solution (as the sodium salt) and requires no other additives to promote thickening e.g. alkali, surfactant etc.
-
An anionic inverse emulsion thickener which imparts an extremely short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a wide pH range. Supplied as an easy to use, low viscosity liquid which gives an instantaneous thickening effect on direct mixing into the composition. The polymer in is already in solution (as the ammonium salt) and not requiring any other additives to promote thickening e.g. alkali, surfactant etc. APEO free.
-
Inverse emulsion thickener imparting very short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a broad pH range with nearly instantaneous thickening.
-
An inverse emulsion thickener which imparts a short flow to a wide variety of aqueous and non-aqueous compositions and is effective over a wide pH range. Low viscosity liquid which instantaneous thickening effect on direct mixing into a composition. The polymer in is already in solution (as the sodium salt) and requiring no additional additives to promote thickening e.g. alkali, surfactant etc. APEO free.
-
Anionic inverse emulsion thickener. Imparts a long stringy flow to a wide variety of aqueous and non-aqueous compositions and is effective over a wide pH range. Low viscosity liquid which gives instantaneous thickening on direct mixing into the composition. The polymer is already in solution (as the sodium salt) and does not require any other additives to promote thickening e.g. alkali, surfactant etc. APEO free.
-
Fumed silica matting agent Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Fumed silica untreated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Fumed silica, untreated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Fumed silica rheology additive Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Fumed silica, treated, rheology additive Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Fumed silica rheology additive, treated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
PANSIL 400 is a polyfunctional additive, supplied as a fine powder manufactured from sepiolite. It is an excellent suspension aid and active filler with an outstanding efficiency/cost ratio.
Properties
PANSIL 400, due to its high surface activity produces an increase in system component distribution favouring the increase of immature resistance and keeping stability after high temperature curing. PANSIL 400 improves polymer, filler, organic and inorganic fibre distribution.Fields of application
- Asphalt sheets.
- Conglomerating in molecular sieves.
- Seed coating.
- Asphalt emulsions.
-
Pansil 100 is a polyfunctional additive manufactured from sepiolite. Its thick powder granulometry makes it easy to handle and use. It is an excellent suspension aid and active filler with an outstimding efficiency/cost ratio.
-
PANGEL W range is formulated to work as thickener and water retention additive in emulsion paints. PANGEL W is a highly efficient thickener based upon organically modified clay manufactured from highly purified sepiolite, that produces high low shear viscosity without impairing the application properties of the formula. Viscosity is not influenced by temperature no pH and together with pseudoplasticity has also a thixotropy. Exhibits water retention properties with increased open time. PANGEL W offers the following properties in water based formulations:
- Easy to disperse
- Specially suitable for high solids content formulations
- Increase productivity
- Excellent can stability
- Reduces syneresis
- Adequate consistency
- Excellent sag control
- Avoids sedimentation
- Good leveling
-
PANGEL S1500 is specially recommended for salt and electrolyte rich systems.
Properties
PANGEL S1500 is a thixotropic additive developed to be used in water-based compositions where electrolytes are present. PANGEL S1500 imparts excellent thixotropic and pseudoplastic properties to the systems it is incorporated to improving stability and spreading properties:- At rest, it provides the system with a high consistency what produces a suspending effect and a great resistance to settling, avoiding sedimentation. Also sagging and film thickness are highly improved due to this effect.
- Under a shear stress, PANGEL S1500 forces the viscosity to promptly fall down, easing manual and mechanical application and leveling
Fields of application
- Suspending agent for liquid additives.
- Asphalt emulsions.
-
PANGEL RMA series is managing rheology on demand, improving cohesion, reducing bleeding and segregation and enhancing concrete pumping operations. PANGEL RMA 400 series are high performance liquid concrete admixtures based on silicates modified and specifically developed for shotcrete. PANGEL RMA 400 series increase sprayed concrete cohesion providing superior bond to rock substrate, faster early strength development and enhancing sprayability and pumpability properties, minimizing the rebound and allowing larger thickness build-up in a single pass in tunnels and mining applications. PANGEL® RMA 400 series is specially developed for underground: • Temporary and permanent rock support in mining and tunneling • Slope stabilization • Grouting FEATURES & BENEFITS • Reduces/ replaces silica fume/ microsilica • Enhances sprayability properties • Reduces rebound reducing materials waste • Increases thickness build-up in single pass • Increases very early strength • Safer, healthier reducing dust generation • Increases mix design robustness allowing moisture and grading tolerances PANGEL RMA 400 series increase concrete cohesion developing faster early strength without affecting other concrete plastic properties (slump life, air control management) and enhancing pumpability.
-
PANGEL OMD2 is a rheological additive for medium to high polarity systems, based upon highly purified bentonite clay. PANGEL OMD2 can be used for alcohols, esters and glycols. Moderate polarity binders are also compatible.
Properties
PANGEL OMD2 is an easy-to-disperse self-activated organobentonite that is recommended for providing the following properties in solvent-borne systems:- Thixotropic and pseudoplastic effects.
- Sag control.
- Excellent levelling.
- Prevents pigment from long-term storage settling.
- No need of pregelling or the use of polar activators.
Fields of application
Use of PANGEL OMD2 as a rheological additive is recommended in the following applications:- Anti-corrosive paints.
- Adhesives.
- Industrial finishes.
- Maintenance coatings.
- Epoxy based coatings.
- Paint removers.
-
PANGEL OMD1 is self-dispersing rheological additive for medium to low polarity systems, based upon a highly purified bentonite clay. PANGEL OMD1 is recommended for both aliphatic solvents and mineral or synthetic oils.
Properties
PANGEL OMD1 is an easy-to-disperse self-activated organobentonite, that is recommended for providing the following properties in solvent-borne systems:- Thixotropic and pseudoplastic effects.
- Sag control.
- Excellent levelling.
- Prevents pigment from long-term storage settling.
- No need of pregelling or the use of polar activators.
Fields of application
Use of PANGEL OMD1 as a rheological additive is recommended in the following applications:- Anti-corrosive paints.
- Polyester coatings.
- Primers.
- Industrial finishes.
- Road marking paints.
- Varnished.
- Lubricating greases.
- Bituminous undercoats.
-
PANGEL OM8 is a rheological additive for low to medium polarity systems based upon highly purified bentonite clay. PANGEL OM8 is particularly recommended for systems based on resins such as polyurethanes, acrylics, polyesters, epoxy esters and alkyds.
Properties
PANGEL OM8 is an organobentonite recommended for providing the following properties in intermediate polarity systems:- Thixotropic and pseudoplastic effects.
- Sag control.
- Excellent levelling.
- Prevents pigment from long-term storage settling.
Fields of application
Use of PANGEL OM8 as a rheological additive is recommended in the following applications:- Anti-corrosive paints.
- Polyester coatings.
- Primers.
- Industrial finishes.
- Road marking paints.
- Bituminous undercoats.
- Varnishes.
- Inks.
-
PANGEL OM4 is a rheological additive based upon a highly purified bentonite clay designed for low polarity systems. PANGEL OM4 is recommended for both aliphatic solvents and mineral or synthetic oils. Pangel OM4 requires the use of polar activators.
Properties PANGEL OM4 is an organobentonite recommended for providing the following properties in oil based systems:
- Decrease of sedimentation
- High thickening capacity
- Does not require polar activator
- High capacity for thikening inverted emulsions
- Control of sagging and dripping while improves stability.
Fields of application
Use of PANGEL OM4 as a rheological additive is recommended in the following applications:- Oil based concentrated formulations
- Formulations based in inverted emulsions
-
Rheological Additive HIGH PURITY SODIUM BENTONITE-BASED PANGEL M90F is a high purity smectite-based additive with a selected particle size, specially developed to modify the rheology of joint compounds, plasters and fillers formulated in both powder and paste. PANGEL M90F is recommended where a fine particle size is required. PANGEL M90F can be used also as a binder agent of organic and inorganic powders. Its elevated swelling capacity in contact with water permits it to break apart easily while maintaining elevated resistance when dry.
-
PANGEL HV is a high efficiency rheological additive, manufactured from high purity sepiolite. Its presentation as a high porosity pellet avoids handling with powder, allowing for maximum efficiency. It is a rheological additive in the form of pellets, for a more convenient handling system.
-
PANGEL CS 610 is a pozzolanic additive based on colloidal silica with very fine (7 nanometers) and narrow particle size distribution. Its rapid surface penetration leads to very fast bonding with calcium hydroxide [Ca(OH)2] which provides an outstanding densifier/hardener effect. PROPERTIES • PANGEL CS 610 reacts with calcium hydroxide in the concrete matrix to create additional calcium silicate hydrates (C-S-H). • PANGEL CS 610 provides a harder and more uniform surface making it withstand abrasion and take a better polish effect. • Due to its unique structure, PANGEL CS 610 works as densifier/ hardener in concrete flooring applications providing better overall mechanical performance (surface hardness, compressive strength, permeability and abrasion resistance ) thus replacing other silicate densifiers. PANGEL CS610 provides tangible benefits and savings vs. other silicate based (i.e. sodium, potassium, lithium) densifiers: • Reduces operating costs by increased ease of maintenance and cleaning • Speed of application; no overnight curing • Deeper penetration • Faster reacting • Safe to handle liquid – lower pH than silicates • Reduces dusting, efflorescence and ASR • Compatible with colored concrete, stains and dyes • No whitening potential; no caustic gel to scrub off • Non-hazardous. Water-based, low odor
-
PANGEL C150 is a rheological additive, manufactured from sepiolite. It is a powder additive that improves the system rheology.
Properties
PANGEL C150 imparts excellent thixotropic and pseudoplastic properties to the systems in which it is incorporated; this favours an excellent suspending and thickening behaviour, improving application and workability of the final product. PANGEL C150 controls system flow and consistency, ensuring optimum distribution of solvents, fillers and other components. Suspensions made with PANGEL C150 are stable even at high electrolyte concentration. Its rheological behaviour is stable in a wide pH range and at high temperatures.Fields of application
- Waterproofing asphalt sheets.
- Asphalt emulsions.
- Water based foundry coatings.
-
PANGEL B5 is a powdered additive with a high thickening and anti-settling capacity for low polarity systems, particularly recommended for systems based on both aliphatic solvents and mineral or synthetic oils used as vehicle in liquid formulations.
Properties
PANGEL B5 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on both aliphatic type solvents and mineral or synthetic oils. PANGEL B5 shows high thickening capacity in low polarity systems without the use of a polar activator for its dispersion. Use of PANGEL B5 has the following advantages against other conventional additives:- Decrease of sedimentation
- High thickening capacity
- Does not require polar activator
- High capacity for thikening inverted emulsions
- Control of sagging and dripping while improves stability.
Fields of application
- Oil based concentrated formulations
- Formulations based in inverted emulsions
-
Pangel B-42 is a powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 provides a strongly pseudoplastic character, producing high consistency levels without affecting viscosity during application. It exhibits its high effectiveness as anti-settling additive in formulations with high solid contents. Use of Pangel B-42 has the following advantages against other conventional additives: • Coatings and paints- Prevents settling of pigments and fillers; controls sagging without aggravating leveling; high stability during transportation and storage. • Printing inks: Improves consistency and prevents settling of pigments. • Paint strippers: Improves stability and facilitates stripping action. • Sealants and joints: Improves wetting and suspension properties; controls sliding. • Others: Control of sagging and dripping; improves stability.
-
Rheological additive for intermediate polarity systems. PANGEL B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. Properties PANGEL B20 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, PANGEL B20 does not require the use of a polar activator for its dispersion. PANGEL B20 provides a strongly pseudoplastic character, producing high consistency levels without affecting viscosity during application. It exhibits its high effectiveness as anti-settling additive in formulations with high solid contents. Use of PANGEL B20 has the following advantages against other conventional additives: •Coatings and paints: Prevents settling of pigments and fillers; controls sagging without aggravating leveling; high stability during transportation and storage. •Printing inks: Improves consistency and prevents settling of pigments. •Unsaturated polyester putties: Improves consistency and workability. •Paint strippers: Improves stability and facilitates stripping action.•Greases based on vegetal oil: High thickening capacity; good stability at high temperature. •Asphalt coatings: High thickening capacity; application in thicker layers; sagging control. • Sealants and joints: Improves wetting and suspension properties; controls sliding. •Others: Control of sagging and dripping; improves stability
-
Pangel B-10 is a powdered additive with a high thickening and anti-settling capacity for intermediate-low polarity systems, particularly recommended for systems based on white spirit type solvents.