-
2,4,5,6 tetrachloroisopthalonitrile (40% CTL) Industrial fungicde (AKA Chlorothalonil) Typical areas of use are paints and coatings, adhesives, caulks and mulch colorants. Long term mold preventative. effective over pH range of 1-10.
-
BIOTREND® ZP + is a industrial preservative containing the active ingredient Zinc Pyrithione. Zinc Pyrithione is used to prevent microbial degradation and deterioration of manufacturing starting materials such as plastics, polymers, and latexes, and in a wide range of finished articles made from these starting materials. The chemical acts to prevent the growth of bacteria, fungi, mildew, and algae that can cause various types of deterioration such as discoloration, staining, odors, etc.
-
Powdered additive that modifies the rheology of mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Cimsil A35 is a thixotropic additive specially developed to act as an anti-sagging / anti-slipping agent, improving workability and visual finish in the systems to which it is incorporated. Cimsil A35 gives mortar, plaster and concrete the following properties:
- Workability
- Thixotropy
- Decreases bleed and segregation
- Gives homogeneity and cohesiveness to the finished product
- Improves adherence to the substrate
- Improves pumpability
- Avoids both tile slipping and mortar sagging
- Improves the surface finish
- Pumpable concrete
- Decorative concrete
- Precasted concrete
- Rendering mortar
- Tile adhesive mortar
- Waterproof mortar
- Fill-in mortar
- Self-levelling mortar
- Repair mortar
- Gypsum-based spray plaster
- Gypsum-based thin layer plaster
- Gypsum-based adhesive plaster
-
Rheology modifier for mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Properties CIMSIL A55 is a chloride-free thixotropic additive specifi cally developed to act as an anti-sagging/anti-slipping agent, CIMSIL A55 fully develops its rheological properties by activation in the presence of cement or gypsum. It improves workability and visual fi nish in the systems to which it is incorporated. CIMSIL A55 gives mortar, plaster and concrete the following properties: • Thixotropy • Workability • Improves adherence to the substrate • Improves pumpability • A voids both tile slipping and mortar sagging • Decreases bleed and segregation • Gives homogeneity and cohesiveness to the finish product • Improves the surface finish Fields of applications • Pumpable concrete • Decorative concrete • Precasted concrete • Rendering mortar • Tile adhesive mortar • Waterproof mortar • Fill-in mortar • Self-levelling mortar • Repair mortar • Gypsum-based spray plaster • Gypsum-based thin layer plaster • Gypsum-based adhesive plaster Dosage Dosage of CIMSIL A55 varies according to the type of application. However, dosages between 0.25 and 1%, referred to the weight of the cement are recommended.
-
Low dust self dispersing rheological additive for mortar and concrete, improving properties in fresh and hardened state. Properties CIMSIL A55 G is a chloride-free thixotropic additive specifically developed to act as an anti-sagging/antislipping agent, CIMSIL A55 G fully develops its rheological properties by activation in the presence of cement or gypsum. It improves workability and visual finish in the systems to which it is incorporated. It is a low dust granular additive designed to provide high efficiency suspension properties.CIMSIL A55 G gives mortar, plaster and concrete the following properties:• Thixotropy • Workability • Improves adherence to the substrate • Improves pumpability • Avoids both tile slipping and mortar sagging • Decreases bleed and segregation • Gives homogeneity and cohesiveness to the finish product • Improves the surface finishCIMSIL A55 G is a thixotropic additive developed to be used in water-based compositions where electrolytes are present. It is a low dust granular additive designed to provide high efficiency suspension properties.Field of Application• Rendering mortars • Tile adhesive mortars • Waterproof mortars • Filling mortars • Self-levelling mortar • Repairing mortars • Pumpable concrete • Decorative concrete • Precasted concrete
-
CIMSIL G30 is an attapulgite based additive specifically developed to modify rheology of wet and dry joint compounds and adhesives. CIMSIL G30 is a rheological additive fully inert and compatible with most common binders either organic or inorganic being particularly effective in highly viscous filling pastes as joint compound for drywall or plasterboards. CIMSIL G30 improves the following properties: • Sag resistance. • Workability. • Improves spreading and pumpability. • Decreases bleed and segregation during storage. • Gives homogeneity to the finish product. • Improves consistency and viscosity under high electrolyte concentration. CIMSIL G30 is a shear thinning additive what allows the right application on the wall while strongly improves sag resistance of the compound before drying or setting. It is normally combined with cellulose ethers showing a good compatibility with them and also with other organic thickeners.It can be also used in cement mortars and other cement based systems in order to provide shear thinning properties. Fields of application • Wet and dry Joint fillers. •S packle compounds. • Crack fillers & mastics. • Sealants.
-
Bio based grinding agent and carrier for carbon black. Based on polymeric blend of triglycerides and surfactants. This product can be used as grinding agent for carbon black and a carrier for pigment pastes. Cost effective, increased milling speeds and cb loading.
-
An amine-free, water-soluble, multi-metal corrosion inhibitor recommended to protect a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. Applications include, alkaline metal cleaners, synthetic coolants & cutting fluids, water based lubricants, water based paints & coatings with many more applications.
-
DeCORE APCI-95MOD is a very low foaming, water soluble anionic corrosion inhibitor used for the prevention of rust on a variety of metal surfaces. It is suggested for use as an all purpose corrosion inhibitor for copper, brass, magnesium, bronze, galvanized steel, cast iron and other ferrous and non-ferrous metals. APPLICATIONS • Synthetic coolants and cutting fluids • Industrial cooling towers • Water based lubricants • Alkaline metal cleaners • Aerosol formulations • Low foam alkaline cleaners • Radiator fluid additive • Treating baths for copper and copper alloys • Water based paints and coatings
-
DeCORE BE is a water-soluble,anionic, non-foaming amine borate. It is a very effective corrosion inhibitor for ferrous and non-ferrous metals in neutral to mildly alkaline systems including aerosol formulations. APPLICATIONS: • Synthetic coolants &cutting fluids for ferrous and non-ferrous metals • Cooling tower additive • Corrosion inhibitor for down-hole drilling • Corrosion inhibitor for radiator • Corrosion inhibitor for aerosol cans • Corrosion inhibitor for aqueous paints & coatings • Metal working fluids
-
A non-foaming amine borate suggested for use as a corrosion inhibitor for ferrous and non-ferrous metals in aqueous solutions.
