-
BIOTREND® ZP + is a industrial preservative containing the active ingredient Zinc Pyrithione. Zinc Pyrithione is used to prevent microbial degradation and deterioration of manufacturing starting materials such as plastics, polymers, and latexes, and in a wide range of finished articles made from these starting materials. The chemical acts to prevent the growth of bacteria, fungi, mildew, and algae that can cause various types of deterioration such as discoloration, staining, odors, etc.
-
TDU 200M is an aromatic substituted urea based on accelerator [1,1-(4 methyl-m-phenylen, bis(3,3 dimethyl urea)]. Used as an accelerator for DICY to produce shelf stable on part systems. Perfect for adhesives, powder coatings, prepegs, films and reinforced composites. Long pot life Fast cure and strength development High Tg CAS #17526-94-2
-
Pangel B-42 is a powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on alcohol, glycol an ketone type solvents, as well as in mixtures of those with water. Pangel B-42 provides a strongly pseudoplastic character, producing high consistency levels without affecting viscosity during application. It exhibits its high effectiveness as anti-settling additive in formulations with high solid contents. Use of Pangel B-42 has the following advantages against other conventional additives: • Coatings and paints- Prevents settling of pigments and fillers; controls sagging without aggravating leveling; high stability during transportation and storage. • Printing inks: Improves consistency and prevents settling of pigments. • Paint strippers: Improves stability and facilitates stripping action. • Sealants and joints: Improves wetting and suspension properties; controls sliding. • Others: Control of sagging and dripping; improves stability.
-
NexSil 12 is an alkaline dispersion of 12 nm colloidal silica at 30% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, precision polishing, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required.
-
NexSil 8 is an alkaline dispersion of 8 nm colloidal silica at 30% SiO2 concentration in water. The particles are negatively charged and have a high specific surface area. The product can be used in a wide variety of applications such as precision investment casting, metal surface treatment, textile treatment, catalyst binder or other applications where a very small particle size colloidal silica is required.
-
Fumed silica, treated, rheology additive Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Fumed silica matting agent Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Fumed silica untreated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Fumed silica, untreated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Precipitated silica Carrier, Free Flow Agent Food, battery separator Over 20 products ranging from 6 microns to 21 microns For food applications OSC has Halal certification and Kosher certification. Application examples: Food and Feed: Seasonings, Spices, Herbs, Sugar, Salt, Mineral mixes and Limestone Agrochemicals: Wettable powders Characteristics: Good flowability and anti-caking behavior of the milled powder
- reduces the caking of low melting powders.
- absorbs promptly any released liquid.
- avoids clogging of the mill and decreases the shutdown times.
- improves the free fl owing and anti-caking properties.
- reduces time and cost consuming maintenance intervals.
- increases the throughput by longer operation times.
-
Precipitated silica Carrier, Free Flow Agent Food, battery separator Over 20 products ranging from 6 microns to 21 microns For food applications OSC has Halal certification and Kosher certification. Application examples: Food and Feed: Seasonings, Spices, Herbs, Sugar, Salt, Mineral mixes and Limestone Agrochemicals: Wettable powders Characteristics: Good flowability and anti-caking behavior of the milled powder
- reduces the caking of low melting powders.
- absorbs promptly any released liquid.
- avoids clogging of the mill and decreases the shutdown times.
- improves the free fl owing and anti-caking properties.
- reduces time and cost consuming maintenance intervals.
- increases the throughput by longer operation times.
-
bulk density: +/- .6 g/cm3 Specific gravity: 2.2 g/cm3 Color: black w/metallic sheen pH: 6-7 free water: < 1% 95-99% purity expansion temps 150 to 200 C
-
Alumina powder that is dispersible in water or ethylene glycol. For use in high temperature coating and as a binder
-
Fumed silica rheology additive, treated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Tytan AQ5000 is used as an advanced polyesterification and transesterification catalyst based on the latest titanate technology. Tytan AQ5000 is recommended for the manufacture of unsaturated polyester, polyester, PET, PTT and PBT without sacrificing the performance when the water content increased in the system. Therefore, Tytan AQ5000 delivers reliable and high performance during the processing.
-
Precipitated silica Carrier, Free Flow Agent Food, battery separator Over 20 products ranging from 6 microns to 21 microns For food applications OSC has Halal certification and Kosher certification. Application examples: Food and Feed: Seasonings, Spices, Herbs, Sugar, Salt, Mineral mixes and Limestone Agrochemicals: Wettable powders Characteristics: Good flowability and anti-caking behavior of the milled powder
- reduces the caking of low melting powders.
- absorbs promptly any released liquid.
- avoids clogging of the mill and decreases the shutdown times.
- improves the free fl owing and anti-caking properties.
- reduces time and cost consuming maintenance intervals.
- increases the throughput by longer operation times.
-
Precipitated silica Matting agents are high-performance silica developed for gloss reduction in a vast range of applications for a vast range of applications. Absorbent for ink jet paper coatings Can be used in the production of defoamers Over 20 products ranging from 2 microns to 12 microns, with surface areas from 180 to 290 m2/g The line contains a variety of products differing in surface area, particle size, and oil absorption. These matting agents are perfectly suited for wood coatings including floor, furniture and cabinet coatings. They provide the best in efficiency, clarity, and in-can stability, while allowing for good flow and leveling.
- Good choice in both waterborne or solvent systems
- Recommended for for UV Coatings Applications
- Matting agents with high clarity and less impact on viscosity
- Matting agents for Coil Coatings Applications
- Matting agents for Low VOC Coatings Applications
-
Precipitated silica Filler Reinforcing agent New generation “High Dispersible Silica” (HDS silica) For food applications OSC has Halal and Kosher certification. Rolling Resistance and Wet Traction:
- Overcome the difficulties of improving wet traction and rolling resistance for rubber industry. Cooperate with appropriate polymers and silane coupling agents, increasing wet traction/ - Reducing rolling resistance
- Better fuel efficiency in high performance
- PCR and TBR tires
- Free flow additive
- Carrier additive applications for the food and industrial powders
- Over 20 products ranging from 9 microns to 250 microns, with surface areas from 90 to 200 m2/g
-
Filler Reinforcing agent New generation “High Dispersible Silica” (HDS silica) For food applications OSC has Halal and Kosher certification. Rolling Resistance and Wet Traction:
- Overcome the difficulties of improving wet traction and rolling resistance for rubber industry. Cooperate with appropriate polymers and silane coupling agents, increasing wet traction/ - Reducing rolling resistance
- Better fuel efficiency in high performance
- PCR and TBR tires
- Free flow additive
- Carrier additive applications for the food and industrial powders
- Over 20 products ranging from 9 microns to 250 microns, with surface areas from 90 to 200 m2/g
-
Fumed silica rheology additive Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
PANGEL B5 is a powdered additive with a high thickening and anti-settling capacity for low polarity systems, particularly recommended for systems based on both aliphatic solvents and mineral or synthetic oils used as vehicle in liquid formulations.
Properties
PANGEL B5 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on both aliphatic type solvents and mineral or synthetic oils. PANGEL B5 shows high thickening capacity in low polarity systems without the use of a polar activator for its dispersion. Use of PANGEL B5 has the following advantages against other conventional additives:- Decrease of sedimentation
- High thickening capacity
- Does not require polar activator
- High capacity for thikening inverted emulsions
- Control of sagging and dripping while improves stability.
Fields of application
- Oil based concentrated formulations
- Formulations based in inverted emulsions
-
Rheological additive for intermediate polarity systems. PANGEL B20 is a powdered additive with a high thickening and anti-settling capacity for intermediate polarity systems, particularly recommended for systems based on aromatic and unsaturated polyester type solvents. Properties PANGEL B20 is particularly recommended to provide thixotropic, suspension and sagging-resistance properties to systems based on aromatic and unsaturated polyester type solvents, PANGEL B20 does not require the use of a polar activator for its dispersion. PANGEL B20 provides a strongly pseudoplastic character, producing high consistency levels without affecting viscosity during application. It exhibits its high effectiveness as anti-settling additive in formulations with high solid contents. Use of PANGEL B20 has the following advantages against other conventional additives: •Coatings and paints: Prevents settling of pigments and fillers; controls sagging without aggravating leveling; high stability during transportation and storage. •Printing inks: Improves consistency and prevents settling of pigments. •Unsaturated polyester putties: Improves consistency and workability. •Paint strippers: Improves stability and facilitates stripping action.•Greases based on vegetal oil: High thickening capacity; good stability at high temperature. •Asphalt coatings: High thickening capacity; application in thicker layers; sagging control. • Sealants and joints: Improves wetting and suspension properties; controls sliding. •Others: Control of sagging and dripping; improves stability
-
Tytan S6 is a titanium ethylacetoacetates used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. Tytan S6 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.
-
Tytan S2 is a titanium ethylacetoacetates used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. Tytan S2 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.
-
Replacement for PU catalysts, especially for tin-based catalysts like DBTL. One- and two- component polyurethane systems, e.g. for automotive refinish coatings, general industrial coatings, coil coatings formulated with blocked isocyanates. Condensation reaction in RTV silicone resins and accelerate the cross-linking process. Catalyst for PU foams.
-
Special block-copolymer for wetting and dispersing in solvent & water-based primers and high filler loads. Good viscosity depresser and mattting.
-
High molecular weight dispersant with solid surface affinity groups. Gives excellent wetting to the fiberglass leading to faster wetting of resin to the fiber glass & eventually gives better bonding strength & performance in the final product.
-
Polyether polymer modification with acidic groups for dispersing in solvent-based paints. Specially developed for PVC, UPE and PU foam systems where it can help to disperse filler and inorganic pigment in the system with good viscosity reduction & extender dispersions.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Supplied in 100% active form. Recommended for solvent-free systems where conventional wetting and dispersing agents cannot perform with organic pigments and carbon blacks. Extremely good compatibility with thermoplastic acrylic, NC and CAB. Great for ink dispersions also.
-
BTX-free modified polyurethane polymeric dispersant for solvent-based systems. Very effective in inorganic, organic pigments and carbon black dispersion preparation. Very-effective 3-dimensional steric hindrance design allows for good stability for all pigments. Very good viscosity reduction and improved color strength.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Improved version of 4070 with no crystallizing problem and supplied in higher solids (45%). Recommended for refinish, can coatings, dispersion of transparent iron oxide and other industrial coatings and pigment concentrate preparations.
-
Modified polyurethane polymeric dispersant for solvent-based systems. Higher molecular weight compared to 4046. Improves dispersing performance, especially with carbon black pigments to provide higher jetness. First choice for high end applications such as OEM, refinish and industrial coatings.
-
Modified polyether polysiloxane silicone developed for high-slip applications where foam stabilization is undesirable. Good transparency, effective in all solvent-based coatings such as NC, AC, polyurethane and baking paints.
