Water based

A concentrate for use as an economical D’Limonene emulsifier. D’Limonene micro-emulsion concentrates can be made that ‘bloom’ upon dilution. Soluble in water, alcohols, chlorinated solvents, terpene solvents, aromatic solvents and glycols. It is insoluble or dispersible in aliphatic solvents and oils.

A readily biodegradable modified amine oxide used to produce clear, stable, colorless sodium hypochlorite or hydrogen peroxide gels. Soluble in water, alcohol and glycols. Insoluble in most solvents and oils.

A low foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~25ºC. It has the second lowest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols, glycols, and solvents. It is water soluble below its cloud point and dispersible above its cloud point (23° -27°C). It is insoluble in oils.

A unique, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including excellent wetting and dispersing properties combined with very low foam.

A unique, very low foaming, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including wetting and dispersing properties. Dispersable in water and oils.

A water-soluble, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25% - 0.5%). It is recommended to protect a variety of metals including aluminum, copper, brass, magnesium, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems.

DeCORE APCI-95MOD is a very low foaming, water soluble anionic corrosion inhibitor used for the prevention of rust on a variety of metal surfaces. It is suggested for use as an all purpose corrosion inhibitor for copper, brass, magnesium, bronze, galvanized steel, cast iron and other ferrous and non-ferrous metals. APPLICATIONS • Synthetic coolants and cutting fluids • Industrial cooling towers • Water based lubricants • Alkaline metal cleaners • Aerosol formulations • Low foam alkaline cleaners • Radiator fluid additive • Treating baths for copper and copper alloys • Water based paints and coatings

CIMSIL G30 is an attapulgite based additive specifically developed to modify rheology of wet and dry joint compounds and adhesives. CIMSIL G30 is a rheological additive fully inert and compatible with most common binders either organic or inorganic being particularly effective in highly viscous filling pastes as joint compound for drywall or plasterboards. CIMSIL G30 improves the following properties: • Sag resistance. • Workability. • Improves spreading and pumpability. • Decreases bleed and segregation during storage. • Gives homogeneity to the finish product. • Improves consistency and viscosity under high electrolyte concentration. CIMSIL G30 is a shear thinning additive what allows the right application on the wall while strongly improves sag resistance of the compound before drying or setting. It is normally combined with cellulose ethers showing a good compatibility with them and also with other organic thickeners.It can be also used in cement mortars and other cement based systems in order to provide shear thinning properties. Fields of application • Wet and dry Joint fillers. •S packle compounds. • Crack fillers & mastics. • Sealants.

Powdered additive that modifies the rheology of mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Cimsil A35 is a thixotropic additive specially developed to act as an anti-sagging / anti-slipping agent, improving workability and visual finish in the systems to which it is incorporated. Cimsil A35 gives mortar, plaster and concrete the following properties:

• Workability
• Thixotropy
• Decreases bleed and segregation
• Gives homogeneity and cohesiveness to the finished product
• Improves adherence to the substrate
• Improves pumpability
• Avoids both tile slipping and mortar sagging
• Improves the surface finish

Field of application

• Pumpable concrete
• Decorative concrete
• Precasted concrete
• Rendering mortar
• Tile adhesive mortar
• Waterproof mortar
• Fill-in mortar
• Self-levelling mortar
• Repair mortar
• Gypsum-based spray plaster
• Gypsum-based thin layer plaster
• Gypsum-based adhesive plaster

Dosage of Cimsil A35 varies according to the type of application. However, dosages between 0.25 and 1 %, referred to the weight of the cement are recommended.