-
Cardolite NX-202x products are low viscosity multipurpose resin modifiers. The long hydrophobic aliphatic side chain of the cardanol molecule gives these products a very low viscosity and provides excellent early water resistance and corrosion protection. By using NX-202x products as epoxy diluents and accelerators, high solids or solvent free formulations can be achieved with enhanced workability and faster cure without sacrificing other performance properties. In addition, the flexibility of the side chain helps increase impact resistance of the final coating. Different Grades Available. NX-2023 can replace nonyl phenol. NX 2023 is non toxic,exhibits higher visc reduction, does not reduce gel time like NP, and shows improved water resistance. These products are a good alternative to synthetic phenolic diluents that have unfavorable labeling.
-
Nonreactive resin modifier with a viscosity of ≤ 60 cPs. Color gardner of ≤ 2.
-
A solvent-free phenalkamine with a viscosity of 1,080 cPS. Color gardner 11. Gel time in 18 mins.
-
Cardolite NX-8101 is an epoxy curing agent based on latest modified CNSL waterborne technology. This product is supplied in water and recommended for epoxy primers and self-levelers for concrete floors.
-
Cardolite NX-9005 is a unique polyol suitable for polyurethane coatings and adhesives. This product has well balanced mechanical properties, high tensile strength and excellent elongation. Non-CNSL Branched Polyol - good UV resistance. Offset Desmophen 1150 and Sovermol 805/1080
-
Suitable for a variety of applications:
- CASE and foam markets
- one and two component systems
- ambient, moisture and heat cured systems n building block for prepolymers
- Excellent water and moisture resistance
- Excellent acid and alkali resistance
- Very good hydrolytic stability
- Fire and thermal resistance
- Can be tailored for different properties
- Available in low to high functionalities
-
Phenalkamine curative used in fast cure, low temperature systems. The CA has excellent corrosion resistance and good color.
-
Cardolite Ultra LITE 2009H is a very light color and low viscosity phenalkamine curing agent suitable for epoxy coating applications protecting concrete and metal substrates. Ultra LITE 2009H provides faster hardness development than Ultra LITE 2009 in addition to excellent cure and film properties. This product is designed primarily for floor topcoats and self-levelers due to its good mechanical properties, and gloss and color retention.
-
Cardolite Ultra LITE 2009SF is a very light color and undiluted phenalkamine curing agent suitable for epoxy coatings applications.
-
Nonreactive resin modifier with a viscosity of 40-100 cPs. Color gardner of 1.
-
A reactive epoxy diluent based on CNSL (biobased). This renewable diluent exhibits very low color, visc reductions, hydrophobicity and flexibility. Viscosity reduction similar to glycidyl ethers (C12-C14 types) and faster cure times at room temp and low temperatures.
-
Cardolite Ultra LITE 2020is a low viscosity, solvent-free multipurpose resin modifier designed for use in coatings, adhesives, and other applications. The long hydrophobic aliphatic side chain of the cardanol molecule gives this product a very low viscosity and provides excellent early water resistance and corrosion protection. Used as an epoxy diluent, high viscosity solvent or solvent free formulations can achieve enhanced workability and higher solids without sacrificing other performance properties using this product. This product also has the ability to react and be used in alkyds, urethanes, and acrylics. Cardolite UltraLITE 2020 was designed as a formulation tool to reduce VOC levels and viscosity of coating and adhesive systems. Although higher in viscosity than some other modifiers, the structure of this product gives excellent dilution efficiency to help rapidly reduce viscosity for improved pigment wetting, flexibility, and general application properties. Physical properties such as water resistance, corrosion protection, color stability, chemical resistance, and gloss are not significantly compromised with the addition of Ultra LITE 2020, and the product can be added in on either component side of multi-part formulations. ADVANTAGES • Lowers viscosity while maintaining performance • Preserves chemical and water resistance • Good dilution effect • Adds flexibility • Reduces high shear • Compatible and usable in a variety of coating chemistries•Improves pigment wetting • Reacts with urethanes, alkyds, and acrylic resin • Low volatility and high flash point • Non-toxic • Based from natural, renewable,non-food raw material feedstock
-
Powdered additive that modifies the rheology of mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Cimsil A35 is a thixotropic additive specially developed to act as an anti-sagging / anti-slipping agent, improving workability and visual finish in the systems to which it is incorporated. Cimsil A35 gives mortar, plaster and concrete the following properties:
- Workability
- Thixotropy
- Decreases bleed and segregation
- Gives homogeneity and cohesiveness to the finished product
- Improves adherence to the substrate
- Improves pumpability
- Avoids both tile slipping and mortar sagging
- Improves the surface finish
- Pumpable concrete
- Decorative concrete
- Precasted concrete
- Rendering mortar
- Tile adhesive mortar
- Waterproof mortar
- Fill-in mortar
- Self-levelling mortar
- Repair mortar
- Gypsum-based spray plaster
- Gypsum-based thin layer plaster
- Gypsum-based adhesive plaster
-
Rheology modifier for mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Properties CIMSIL A55 is a chloride-free thixotropic additive specifi cally developed to act as an anti-sagging/anti-slipping agent, CIMSIL A55 fully develops its rheological properties by activation in the presence of cement or gypsum. It improves workability and visual fi nish in the systems to which it is incorporated. CIMSIL A55 gives mortar, plaster and concrete the following properties: • Thixotropy • Workability • Improves adherence to the substrate • Improves pumpability • A voids both tile slipping and mortar sagging • Decreases bleed and segregation • Gives homogeneity and cohesiveness to the finish product • Improves the surface finish Fields of applications • Pumpable concrete • Decorative concrete • Precasted concrete • Rendering mortar • Tile adhesive mortar • Waterproof mortar • Fill-in mortar • Self-levelling mortar • Repair mortar • Gypsum-based spray plaster • Gypsum-based thin layer plaster • Gypsum-based adhesive plaster Dosage Dosage of CIMSIL A55 varies according to the type of application. However, dosages between 0.25 and 1%, referred to the weight of the cement are recommended.
-
Low dust self dispersing rheological additive for mortar and concrete, improving properties in fresh and hardened state. Properties CIMSIL A55 G is a chloride-free thixotropic additive specifically developed to act as an anti-sagging/antislipping agent, CIMSIL A55 G fully develops its rheological properties by activation in the presence of cement or gypsum. It improves workability and visual finish in the systems to which it is incorporated. It is a low dust granular additive designed to provide high efficiency suspension properties.CIMSIL A55 G gives mortar, plaster and concrete the following properties:• Thixotropy • Workability • Improves adherence to the substrate • Improves pumpability • Avoids both tile slipping and mortar sagging • Decreases bleed and segregation • Gives homogeneity and cohesiveness to the finish product • Improves the surface finishCIMSIL A55 G is a thixotropic additive developed to be used in water-based compositions where electrolytes are present. It is a low dust granular additive designed to provide high efficiency suspension properties.Field of Application• Rendering mortars • Tile adhesive mortars • Waterproof mortars • Filling mortars • Self-levelling mortar • Repairing mortars • Pumpable concrete • Decorative concrete • Precasted concrete
-
CIMSIL G30 is an attapulgite based additive specifically developed to modify rheology of wet and dry joint compounds and adhesives. CIMSIL G30 is a rheological additive fully inert and compatible with most common binders either organic or inorganic being particularly effective in highly viscous filling pastes as joint compound for drywall or plasterboards. CIMSIL G30 improves the following properties: • Sag resistance. • Workability. • Improves spreading and pumpability. • Decreases bleed and segregation during storage. • Gives homogeneity to the finish product. • Improves consistency and viscosity under high electrolyte concentration. CIMSIL G30 is a shear thinning additive what allows the right application on the wall while strongly improves sag resistance of the compound before drying or setting. It is normally combined with cellulose ethers showing a good compatibility with them and also with other organic thickeners.It can be also used in cement mortars and other cement based systems in order to provide shear thinning properties. Fields of application • Wet and dry Joint fillers. •S packle compounds. • Crack fillers & mastics. • Sealants.
-
Bio based grinding agent and carrier for carbon black. Based on polymeric blend of triglycerides and surfactants. This product can be used as grinding agent for carbon black and a carrier for pigment pastes. Cost effective, increased milling speeds and cb loading.
-
An amine-free, water-soluble, multi-metal corrosion inhibitor recommended to protect a variety of metals including aluminum, copper, brass, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems. Applications include, alkaline metal cleaners, synthetic coolants & cutting fluids, water based lubricants, water based paints & coatings with many more applications.
-
DeCORE APCI-95MOD is a very low foaming, water soluble anionic corrosion inhibitor used for the prevention of rust on a variety of metal surfaces. It is suggested for use as an all purpose corrosion inhibitor for copper, brass, magnesium, bronze, galvanized steel, cast iron and other ferrous and non-ferrous metals. APPLICATIONS • Synthetic coolants and cutting fluids • Industrial cooling towers • Water based lubricants • Alkaline metal cleaners • Aerosol formulations • Low foam alkaline cleaners • Radiator fluid additive • Treating baths for copper and copper alloys • Water based paints and coatings
-
DeCORE BE is a water-soluble,anionic, non-foaming amine borate. It is a very effective corrosion inhibitor for ferrous and non-ferrous metals in neutral to mildly alkaline systems including aerosol formulations. APPLICATIONS: • Synthetic coolants &cutting fluids for ferrous and non-ferrous metals • Cooling tower additive • Corrosion inhibitor for down-hole drilling • Corrosion inhibitor for radiator • Corrosion inhibitor for aerosol cans • Corrosion inhibitor for aqueous paints & coatings • Metal working fluids
-
A non-foaming amine borate suggested for use as a corrosion inhibitor for ferrous and non-ferrous metals in aqueous solutions.
-
A water-soluble, low foaming, multi-metal corrosion inhibitor effective at low levels (0.25% - 0.5%). It is recommended to protect a variety of metals including aluminum, copper, brass, magnesium, bronze, steel, cast iron, ferrous and non-ferrous metals in aqueous systems.
-
A low foaming, mixed amine carboxylate. It is recommended for use as a low foaming, corrosion inhibitor for ferrous and non-ferrous metals in aqueous systems at pH >7.
-
A very low foaming, water soluble corrosion inhibitor primarily used for the prevention of rust on steel and cast iron. It also provides limited short term corrosion inhibition on brass, copper and other non-ferrous metals. It is not recommended for use on aluminum.
-
A unique, very low foaming, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including wetting and dispersing properties. Dispersable in water and oils.
-
A 100% active mixed alcohol ethoxylate suggested for use in solid or block formulations. Soluble in water, alcohols and glycols. It is insoluble in most solvents and oils.
-
DeIONIC LF-60 is a low foaming, nonionic alkoxylated alcohol with excellent wetting and dispersing properties. APPLICATIONS • High spray pressure cleaners • Mechanical dishwashing • Industrial alkaline cleaners • Industrial metal cleaners • Liquid laundry detergents • Pigment grinding and dispersant • Bottle washing • Textile wetting and scouring • Agricultural sprays •Powdered detergents
-
A unique, modified alkoxylated alcohol. This product exhibits multifunctional characteristics including excellent wetting and dispersing properties combined with very low foam.
-
A unique, modified alkoxylated alcohol delivering multifunctional characteristics including excellent dynamic surface tension reduction, wetting and very low foam. Properties are similar to DeIONIC LF-60MOD with the additional feature of being alkylphenol ethoxylate free.
-
A very low foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~15ºC. It has the lowest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols, glycols and solvents. It is water soluble below its cloud point, dispersible above its cloud point (13° -18°C), and insoluble in oils.
-
A low foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~25ºC. It has the second lowest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols, glycols, and solvents. It is water soluble below its cloud point and dispersible above its cloud point (23° -27°C). It is insoluble in oils.
-
A moderate foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~40ºC. It exhibits a mid-range cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols and glycols. It is water soluble below its cloud point, dispersible above its cloud point (38° - 42°C), and insoluble in oils.
-
A moderate foaming, nonionic, alkoxylated alcohol having a cloud point in water of ~61ºC. It has the highest cloud point in a series of DeFOREST alkoxylates with cloud points ranging from 15°C to 61°C. Soluble in alcohols and glycols. It is water soluble below its cloud point, dispersible above its cloud point (56° -63°C), and insoluble or dispersible in oils and solvents.
