- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Fumed silica untreated Applications
-
Fumed silica, untreated Applications
- Synthetic rubbers and Silicone rubbers: Reinforcing effect , Electrical insulation
- Sealants: Thickening and thixotropy, Reinforcement, improved adhesion
- Unsaturated polyester resins: Thickening and thixotropy
- Paints / Coatings: Thickening and thixotropy, Storage stability (resistance to settlement)
- Adhesives: Thickening and thixotropy, improved adhesion Storage stability (resistance to settlement)
- Paper: Adsorbent, Transparency
- Bulk materials: Anti-caking, free flow aids , Adsorbent, Anti-blocking effect, moisture resistance
- CMP: Polishing agent
- Toners: Improved flow properties, electric charge control, Improved toner transfer to paper
-
Precipitated silica Carrier, Free Flow Agent Food, battery separator Over 20 products ranging from 6 microns to 21 microns For food applications OSC has Halal certification and Kosher certification. Application examples: Food and Feed: Seasonings, Spices, Herbs, Sugar, Salt, Mineral mixes and Limestone Agrochemicals: Wettable powders Characteristics: Good flowability and anti-caking behavior of the milled powder
- reduces the caking of low melting powders.
- absorbs promptly any released liquid.
- avoids clogging of the mill and decreases the shutdown times.
- improves the free fl owing and anti-caking properties.
- reduces time and cost consuming maintenance intervals.
- increases the throughput by longer operation times.
-
Precipitated silica Carrier, Free Flow Agent Food, battery separator Over 20 products ranging from 6 microns to 21 microns For food applications OSC has Halal certification and Kosher certification. Application examples: Food and Feed: Seasonings, Spices, Herbs, Sugar, Salt, Mineral mixes and Limestone Agrochemicals: Wettable powders Characteristics: Good flowability and anti-caking behavior of the milled powder
- reduces the caking of low melting powders.
- absorbs promptly any released liquid.
- avoids clogging of the mill and decreases the shutdown times.
- improves the free fl owing and anti-caking properties.
- reduces time and cost consuming maintenance intervals.
- increases the throughput by longer operation times.
-
Cardolite Ultra LITE 2020is a low viscosity, solvent-free multipurpose resin modifier designed for use in coatings, adhesives, and other applications. The long hydrophobic aliphatic side chain of the cardanol molecule gives this product a very low viscosity and provides excellent early water resistance and corrosion protection. Used as an epoxy diluent, high viscosity solvent or solvent free formulations can achieve enhanced workability and higher solids without sacrificing other performance properties using this product. This product also has the ability to react and be used in alkyds, urethanes, and acrylics. Cardolite UltraLITE 2020 was designed as a formulation tool to reduce VOC levels and viscosity of coating and adhesive systems. Although higher in viscosity than some other modifiers, the structure of this product gives excellent dilution efficiency to help rapidly reduce viscosity for improved pigment wetting, flexibility, and general application properties. Physical properties such as water resistance, corrosion protection, color stability, chemical resistance, and gloss are not significantly compromised with the addition of Ultra LITE 2020, and the product can be added in on either component side of multi-part formulations. ADVANTAGES • Lowers viscosity while maintaining performance • Preserves chemical and water resistance • Good dilution effect • Adds flexibility • Reduces high shear • Compatible and usable in a variety of coating chemistries•Improves pigment wetting • Reacts with urethanes, alkyds, and acrylic resin • Low volatility and high flash point • Non-toxic • Based from natural, renewable,non-food raw material feedstock
-
Cardolite NT-3000 is an aliphatic monoglycidyl ether containing alkyl chains,which are predominately C12 and C14 in length.
-
Cardolite NT-1515X70 is a xylene solution of a high viscosity polyamide, designed for use with solid or liquid epoxy resins. NT-1515X70 epoxy resin systems are used in maintenance coatings and primers because of their excellent corrosion resistance and adhesion properties. This product is also useful in adhesive applications.
-
Cardolite NT-1515is a solvent free, high viscosity polyamide designed for use with solid or liquid epoxy resins. NT-1515 epoxy systems can be used in maintenance coatings, primers and enamel paint formulations because of their excellent corrosion resistance and adhesion properties. This product is also useful in adhesive applications.
-
Cardolite Ultra LITE 2009H is a very light color and low viscosity phenalkamine curing agent suitable for epoxy coating applications protecting concrete and metal substrates. Ultra LITE 2009H provides faster hardness development than Ultra LITE 2009 in addition to excellent cure and film properties. This product is designed primarily for floor topcoats and self-levelers due to its good mechanical properties, and gloss and color retention.
-
Cardolite Ultra LITE 2009SF is a very light color and undiluted phenalkamine curing agent suitable for epoxy coatings applications.
-
DePHOS 8028 is an 80% active potassium salt of an organic phosphate ester with moderate foaming properties. APPLICATIONS: • Low foam alkaline and acid cleaners • Scouring agents • Synthetic cooling and cutting fluids • Corrosion inhibitor in aerosol can formulations • Emulsion cleaners • Textile wetting agent • Dry cleaning detergents • Pigment dispersant
-
DePHOS QSA-90 is ahigh foaming, complex phosphate ester in free acid form. APPLICATIONS:
- High alkaline cleaners
- Wax strippers
- Oven cleaners
- Toilet bowl cleaners
- Metal cleaners
- Floor cleaners
- Steam cleaners
- Car wash formulations
- Textile wetting agent
-
DePHOS 4AL is a low – moderate foaming phosphate ester in free acid form. Suggested for use as a lubricant, corrosion inhibitor, and emulsifier in metal working applications. Very effective for aluminum machining applications. APPLICATIONS: • Metal working products • Rolling oils • Emulsion Cleaner • Alkaline cleaners
-
DeTHOX TDA-8.5-15W is anonionic, 85% active, tridecyl alcohol ethoxylated with approximately 8 -9 moles of EO. It contains ~15% water to maintain fluidity for easy handling. APPLICATIONS • High foam alkaline and acid detergents • Solubilizer for alkyl aryl sulfonates • Wetting agent in highly acidic systems • Emulsion paint strippers • Solubilizer for fragrances and oils • Textile detergents•Agricultural spray emulsions • Floor cleaners • High pressure spray cleaners • Emulsion polymerization • Wetting agent for corrosion inhibitors • Pulp & paper processing • Dust suppressant for mining operations • Vehicle wash detergents
-
DeTHOX AMINE C-15 is an ethoxylated coconut amine with fifteen moles of ethylene oxide.It exhibits mildly cationic behavior and is used primarily used as an emulsifier, lubricant, corrosion inhibitor,and dispersant. APPLICATIONS • Water based inks • Wetting and leveling agent for use in dyeing applications • Emulsifier for agricultural chemicals • Lubricant in synthetic cutting fluids • Corrosion inhibitor in down-hole drilling applications • Latex emulsifier and stabilize
-
DeTERGE AN508-LFis a complex modified amphoteric surfactant. APPLICATIONS • Low foam, alkaline detergents • Caustic cleaners • Acid cleaners • Mechanical dishwashing detergents • High pressure alkaline detergents • Steam cleaners•Metal cleaners • Food plant and dairy cleaners • Plating baths•Concrete cleaners • Alkaline soak and tank cleaners • Alkaline paint stripper • Mechanical hard surface cleaner formulations • Aircraft and aluminum cleaners
-
DeSULF SO-LF33 is a moderate foaming anionic, 33% active,sodium octylsulfate. APPLICATIONS • Caustic cleaners • Alkaline or mild acid cleaners • Cleaners containing chlorine or peroxide • All purpose cleaners • Rinse aid for mechanical dishwashing • Glass cleaners•Fire fighting agents • Mercerizing agents for textiles • Wetting agent for synthetic coolants • High pressure spray detergents • Metal cleaners • Carpet extraction cleaners
-
DeTAINE PB is a readily biodegradable, palmitic derived betaine acceptable for use in a wide variety of formulations including Personal Care applications (INCI name: Cetyl Betaine). This amphoteric, alcohol-free betaine produces rich, dense foam and affords good viscosity building properties. Suggested for use in acidic and alkaline formulations. APPLICATIONS • Alkaline or acid foaming cleaners • Bowl cleaners • Vertical surface cleaners • Fine laundry and fabric detergents • Manual hand dishwashing detergents • Viscosity & foam builder for liquid detergents • Car wash detergents • Hand cleansers, shampoo, body wash • Sulfate-free personal care products
-
DeIONIC LF-60 is a low foaming, nonionic alkoxylated alcohol with excellent wetting and dispersing properties. APPLICATIONS • High spray pressure cleaners • Mechanical dishwashing • Industrial alkaline cleaners • Industrial metal cleaners • Liquid laundry detergents • Pigment grinding and dispersant • Bottle washing • Textile wetting and scouring • Agricultural sprays •Powdered detergents
-
DeCORE BE is a water-soluble,anionic, non-foaming amine borate. It is a very effective corrosion inhibitor for ferrous and non-ferrous metals in neutral to mildly alkaline systems including aerosol formulations. APPLICATIONS: • Synthetic coolants &cutting fluids for ferrous and non-ferrous metals • Cooling tower additive • Corrosion inhibitor for down-hole drilling • Corrosion inhibitor for radiator • Corrosion inhibitor for aerosol cans • Corrosion inhibitor for aqueous paints & coatings • Metal working fluids
-
Binder for use in flexible elastomeric roof coatings and stucco. % Solids 52.5 Viscosity 400 - 2000 pH 7.5 - 8.5 Polymer Type Styrene / Acrylic Surfactant Anionic
-
Styrene acrylic copolymer TEXICRYL AD9108 is a styrene acrylic copolymer emulsion designed to offer excellent gloss, clarity, and adhesion suitable for use in metal, wood, and plastic coating applications. Coatings based on Texicryl AD9108 exhibit excellent alkali and detergent resistance. TEXICRYL AD9108 can be utilized in a range of emulsion paint formulations varying in properties from semi-gloss finish to high pigment volume concentration low-cost paints. It provides excellent alkali resistance, block resistance, and fast dry Solids content % 46 ± 1 Viscosity at 25°C 50 - 350 pH 8.5 – 9.5
-
Styrene acrylic copolymer emulsion TEXICRYL 13-824 is a styrene- acrylic copolymer emulsion that can be coalesced to form a solvent and plasticiser resistant film. TEXICRYL 13-824 has been developed for the formulation of plasticiser resistant ink. Solids Content % 45 Viscosity at 25°C 190 pH 8.5
-
Binder for use in flexible elastomeric roof coatings and stucco. % Solids 52.5 Viscosity 400 - 2000 pH 7.5 - 8.5 Polymer Type Styrene / Acrylic Surfactant Anionic
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent
-
Fluorocarbon modified polyacrylic Anti-crater, substrate wetting and leveling agent for solvent-based coatings AFCONA-3670 is an improved version of AFCONA-3777 on managing surface control of coatings. It has lower surface tension than AFCONA -3777. The combination with a suitable polysiloxane for better overall performance is highly recommended. Due to the fluorocarbon modification, it gives lower surface tension than normal pure acrylic leveling agents. Therefore, it gives better anti-crater and improved substrate wetting. The obvious performances of AFCONA-3670 are: 1. improve leveling 2. prevent craters 3. help substrate wetting 4. act as a defoamer and de-aeration aid 5. do not interfere with intercoat adhesion AFCONA-3670 is suitable for all solvent based coatings, especially: 1. baking paints, as leveling and anti-crater agent 2. PU coatings, as leveling, anti-crater and anti inner bubble agent 3. epoxies, as leveling and anti-crater agent