Shop

PANGEL CS 610 is a pozzolanic additive based on colloidal silica with very fine (7 nanometers) and narrow particle size distribution. Its rapid surface penetration leads to very fast bonding with calcium hydroxide [Ca(OH)2] which provides an outstanding densifier/hardener effect. PROPERTIES • PANGEL CS 610 reacts with calcium hydroxide in the concrete matrix to create additional calcium silicate hydrates (C-S-H). • PANGEL CS 610 provides a harder and more uniform surface making it withstand abrasion and take a better polish effect. • Due to its unique structure, PANGEL CS 610 works as densifier/ hardener in concrete flooring applications providing better overall mechanical performance (surface hardness, compressive strength, permeability and abrasion resistance ) thus replacing other silicate densifiers. PANGEL CS610 provides tangible benefits and savings vs. other silicate based (i.e. sodium, potassium, lithium) densifiers: • Reduces operating costs by increased ease of maintenance and cleaning • Speed of application; no overnight curing • Deeper penetration • Faster reacting • Safe to handle liquid – lower pH than silicates • Reduces dusting, efflorescence and ASR • Compatible with colored concrete, stains and dyes • No whitening potential; no caustic gel to scrub off • Non-hazardous. Water-based, low odor

PANGEL RMA series is managing rheology on demand, improving cohesion, reducing bleeding and segregation and enhancing concrete pumping operations. PANGEL RMA 400 series are high performance liquid concrete admixtures based on silicates modified and specifically developed for shotcrete. PANGEL RMA 400 series increase sprayed concrete cohesion providing superior bond to rock substrate, faster early strength development and enhancing sprayability and pumpability properties, minimizing the rebound and allowing larger thickness build-up in a single pass in tunnels and mining applications. PANGEL® RMA 400 series is specially developed for underground: • Temporary and permanent rock support in mining and tunneling • Slope stabilization • Grouting FEATURES & BENEFITS • Reduces/ replaces silica fume/ microsilica • Enhances sprayability properties • Reduces rebound reducing materials waste • Increases thickness build-up in single pass • Increases very early strength • Safer, healthier reducing dust generation • Increases mix design robustness allowing moisture and grading tolerances PANGEL RMA 400 series increase concrete cohesion developing faster early strength without affecting other concrete plastic properties (slump life, air control management) and enhancing pumpability.

Rheology modifier for mortar, gypsum-plaster and concrete, improving their properties in both the fresh and hardened state. Properties CIMSIL A55 is a chloride-free thixotropic additive specifi cally developed to act as an anti-sagging/anti-slipping agent, CIMSIL A55 fully develops its rheological properties by activation in the presence of cement or gypsum. It improves workability and visual fi nish in the systems to which it is incorporated. CIMSIL A55 gives mortar, plaster and concrete the following properties: • Thixotropy • Workability • Improves adherence to the substrate • Improves pumpability • A voids both tile slipping and mortar sagging • Decreases bleed and segregation • Gives homogeneity and cohesiveness to the finish product • Improves the surface finish Fields of applications • Pumpable concrete • Decorative concrete • Precasted concrete • Rendering mortar • Tile adhesive mortar • Waterproof mortar • Fill-in mortar • Self-levelling mortar • Repair mortar • Gypsum-based spray plaster • Gypsum-based thin layer plaster • Gypsum-based adhesive plaster Dosage Dosage of CIMSIL A55 varies according to the type of application. However, dosages between 0.25 and 1%, referred to the weight of the cement are recommended.

Rheological Additive HIGH PURITY SODIUM BENTONITE-BASED PANGEL M90F is a high purity smectite-based additive with a selected particle size, specially developed to modify the rheology of joint compounds, plasters and fillers formulated in both powder and paste. PANGEL M90F is recommended where a fine particle size is required. PANGEL M90F can be used also as a binder agent of organic and inorganic powders. Its elevated swelling capacity in contact with water permits it to break apart easily while maintaining elevated resistance when dry.

Tytan S3 is an ethylacetoacetate titanate silane chelate used commonly as important additives in moisture curing room temperature vulcanizable (RTV) silicone sealant, catalyst for silane and silicone cross linking as well as moisture scavenger for sealant. Tytan S3 is sensitive to water and will react and cure immediately while in contact with moisture at room temperature.

Tytan AP310 is an ethyl citrate titanium complex that can be used as an adhesion promoter for printing, crosslinker for paints and as a catalyst for esterification. Due to its chelated structure, Tytan AP310 shows delayed reaction at ambient temperature and thus facilitates storage stability of inks.

Tytan CA 2E is a formulated catalyst suitable for ethylene dimerization process for high purity 1-butene production. The liquid phase catalyst could avoid isomerization of 1-butene to 2-butene.